Knowledge of air compressor air pump

   The air pump, as a power facility, if the pressure goes up, it will definitely not meet our use requirements, so what is the problem if the pressure of the air pump does not go up? How to repair it? Now we will show you a simple analysis.

First case

    It may be that the sealing of the cylinder of the air pump is damaged, resulting in air leakage in the cylinder, causing the pressure to fail to rise. In this case, it is recommended to take it to a repair shop for repairs or contact the manufacturer for after-sales repairs.

Second case

    It may be that the power supply of the air pump is out of phase, and the circuit board is in poor contact, which causes the power supply to be out of phase. In this case, it is necessary to check the circuit board and power supply, and make improvements and repairs after determining the cause.

Third case

    The pressure gauge of the air pump is damaged, or the pressure gauge range is too large, resulting in inaccurate measurement data. In this case, it is only necessary to replace the pressure gauge and test again.

Fourth case

    It may be that the air pressure of the pressure limiting valve of the air pump is set to be low, mainly because of safety considerations. In this case, if the air pump does not meet the requirements, it is recommended to replace the larger air pump for safety.

In here choose your suitable machine.