Model |
Working Area |
Laser Output Power |
Max Speed |
|
|
Model |
Working Area |
Laser Output Power |
Max Speed |
|
|
Model |
Working Area |
Laser Output Power |
Max Speed |
|
|
Model |
Power (kw) |
FAD (m3/minute) |
Pressure (Bar) |
RM-CH-15/16 |
15 |
1.2 |
20 |
Model |
Power |
FAD(m3/min) |
Pressure |
Model |
FAD(m3/min) |
Power(kw) |
Freezing Medium |
RM-20GF |
2.6 |
0.95 |
R22 |
Model |
FAD(m3/min) |
Pipe Size |
Weight |
RMD-016 |
1.6 |
G1 |
37 |
08, 2023
by Harry
Reasons and solutions for screw air compressors that cannot be unloaded and frequently loaded and unloaded
07, 2023
by Harry
04, 2023
by Max
The air pump, as a power facility, if the pressure goes up, it will definitely not meet our use requirements, so what is the problem if the pressure of the air pump does not go up? How to repair it?
04, 2023
by Max
An efficient and reliable air compressor is very important for the production of light cutting machines. But there are many different types of air compressors, and finding the one that's right for you can be challenging. Screw air compressors are the most popular type for the job. There are 8 distinct advantages of rotary screw air compressors.
04, 2023
by Harry
As we all know, the working principle of the compression cavity of the air compressor is based on the extrusion principle. The side contours of the active shaft and the passive shaft of the rotor are spiral, and they are driven by the electric motor and the transmission mechanism to coincide with each other and rotate without friction.
04, 2023
by Max
When manufacturing explosion-proof motors, the choice of materials is very important, because the quality of the materials directly affects the performance and durability of the motor.
03, 2023
by Harry
The laser cutting machine focuses the laser light emitted from the laser device into a high power density laser beam through the optical path system. The laser beam of the CNC cutting machine irradiates the surface of the workpiece to make the workpiece reach the melting point or boiling point. At the same time, the high-pressure gas coaxial with the beam blows away the molten or vaporized metal. With the movement of the relative position of the beam and the workpiece, the material finally forms a slit , so as to achieve the purpose of cutting.
03, 2023
by Max
Generally, when we only use the screw air compressor, the quality of the compressed air often cannot meet our air consumption requirements, so it will be used together with the compressed air post-processing equipment. As the complementary equipment of the screw air compressor, the post-processing equipment is also very important in the process of using air.
03, 2023
by The functions and troubleshooting of each component of the screw air compressor(2)
The function of the components of the oil-injected screw air compressor is introduced, and the working principle of the components is analyzed. Precautions in maintenance and analysis and elimination of individual faults.
03, 2023
by Max
The function of the components of the oil-injected screw air compressor is introduced, and the working principle of the components is analyzed. Precautions in maintenance and analysis and elimination of individual faults.
03, 2023
by Max
An oil-injected screw air compressor unit is mainly composed of two parts: the main machine and the auxiliary machine. The main machine includes the main machine and the main motor of the screw air compressor. systems and electrical systems, etc.
03, 2023
by Harry
During the operation of the screw air compressor, if the oil separation core is damaged, damaged, perforated, etc., the function of oil and gas separation will be lost. That is to say, the mixed gas and the exhaust pipe of the compressor are directly connected, so a large amount of oil is not separated, and will be discharged out of the body together with the gas, resulting in an oil-carrying fault during use.
03, 2023
by Harry
Air compressors and cold dryers are the most common equipment in manufacturing at present, and many manufacturers will be equipped with an air compressor and cold dryer for production use. In reality, our most common air compressor is the screw air compressor, which is recognized by everyone for its reliable operation, long life, and low failure rate. However, the use of screw air compressors alone often cannot meet the demand for compressed air for production, because the untreated compressed air discharged from the screw air compressor contains a lot of moisture. If the moisture is not removed, It may affect the normal operation of our gas equipment, and if it is serious, it will corrode the machinery and equipment and cause damage to the pneumatic components. So at this time we need to add a cold dryer at the back end of the screw air compressor to dry and purify the compressed air.
03, 2023
by Max
The main components of the screw air compressor are the screw head and the oil-gas separation barrel. The screw type single-stage compression air compressor is composed of a pair of male and female rotors (or called screws) that are parallel to each other and rotates in the cylinder, so that the air between the rotor tooth slots continuously produces periodic volume changes, and the air moves along the The rotor axis is conveyed from the suction side to the output side, realizing the whole process of suction, compression and exhaust of the screw air compressor.
03, 2023
by Harry
When using a screw air compressor, you need to consider these four aspects: the speed of the screw air compressor, the operating temperature of the screw air compressor, the lubrication method of the screw air compressor, and the operating environment of the screw air compressor.
03, 2023
by Harry
It is very worthwhile to use the frequency converter to adjust the frequency of the air compressor, which not only saves resources, but also improves the working efficiency of the air compressor system, which can bring more benefits to users.