03, 2023
by Harry
During the operation of the screw air compressor, if the oil separation core is damaged, damaged, perforated, etc., the function of oil and gas separation will be lost. That is to say, the mixed gas and the exhaust pipe of the compressor are directly connected, so a large amount of oil is not separated, and will be discharged out of the body together with the gas, resulting in an oil-carrying fault during use.
03, 2023
by Harry
Air compressors and cold dryers are the most common equipment in manufacturing at present, and many manufacturers will be equipped with an air compressor and cold dryer for production use. In reality, our most common air compressor is the screw air compressor, which is recognized by everyone for its reliable operation, long life, and low failure rate. However, the use of screw air compressors alone often cannot meet the demand for compressed air for production, because the untreated compressed air discharged from the screw air compressor contains a lot of moisture. If the moisture is not removed, It may affect the normal operation of our gas equipment, and if it is serious, it will corrode the machinery and equipment and cause damage to the pneumatic components. So at this time we need to add a cold dryer at the back end of the screw air compressor to dry and purify the compressed air.
03, 2023
by Max
The main components of the screw air compressor are the screw head and the oil-gas separation barrel. The screw type single-stage compression air compressor is composed of a pair of male and female rotors (or called screws) that are parallel to each other and rotates in the cylinder, so that the air between the rotor tooth slots continuously produces periodic volume changes, and the air moves along the The rotor axis is conveyed from the suction side to the output side, realizing the whole process of suction, compression and exhaust of the screw air compressor.
03, 2023
by Harry
When using a screw air compressor, you need to consider these four aspects: the speed of the screw air compressor, the operating temperature of the screw air compressor, the lubrication method of the screw air compressor, and the operating environment of the screw air compressor.
03, 2023
by Harry
It is very worthwhile to use the frequency converter to adjust the frequency of the air compressor, which not only saves resources, but also improves the working efficiency of the air compressor system, which can bring more benefits to users.